LED Drivers / Power Supplies

Part # GEPS24D-80U Dimmable Tetra 24VDC/80W Power Supply is damp rated and self-contained. Can be used with a 0-10v dimming controller. Input Voltage: 90-305vInput Current: 1.1AOutput Voltage: 24vdcOutput power: 80wDimensions: 9.5" x 1.7" x 1.2" NOTE:...

Part # GEPS24-300U-GLX2 Tetra 24VDC/300W Power Supply is dry and damp location rated. Remote or raceway use with (3) 96 watt output banks. Class 2 Power Supply: Input Voltage 120-277VAC. Input Current: 2.55AOutput Voltage: 24vdcOutput power: 288w -(3)...

Part # GEPS24-25U-NA Tetra 24VDC/25W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 100-277VAC. Click here for GEPS24-25U-NA installation and loading instructions.

Part # GEPS24-180U Tetra 24VDC/180W Power Supply is dry and damp location rated. Remote or raceway use with 2 output banks. Class 2 Power Supply: Input Voltage 90-305VAC. Input Current: 0.7AOutput Voltage: 24vdcOutput power: 180w totalDimensions: 15.5" x...

Part # GEPS24-100U-NA Tetra 24VDC/96W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 108-305VAC. Click here for installation information.

Part # GEPS12-60U-NA Tetra 12VDC/60W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 108-305VAC. Replaces the discontinued GEPS12-60 and the GEPS12-60U

Part # GEPS12W-60 Tetra MAX 12VDC/60W Power Supply is wet rated and self-contained. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 90-264VAC.

Part # GEPS12-25U-NA Tetra MAX 12VDC/25W Power Supply is damp rated and self-contained. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 100-305VAC. This is the direct replacement for the discontinued GEPS12-20.

Part # GECLPSPH-2 Tetra LED control module for GECLPSPH retrofit.If this unit is replacing a GECLPSPH, a quantity of (2) GECLPSPH-2 and a quantity of (2) GEPS24-100U-GLX2 power supplies are required for operation.For more information regarding the...

Part # GECLPS5-2 Tetra LED control module for GECLPS5 retrofit.To replace a GECLPS5, a quantity of (2) GECLPS5-2 and a quantity of (2) GEPS24-100U-GLX2 power supplies are required for operation.For more information regarding the replacement, click here...

Part# GECLPS3-2 Tetra LED control module for GECLPS3 and GECLPS4 retrofit.This unit is a control module and a requires a separate GEPS24-100U-GLX2 power supply in addition to the GECLPS3-2.For more information regarding the replacement, click here to...

Part # DCA-10-120 Phillips Advance 0-10 volt led dimming control - 120W Input Volts: 120vOutput current: 5A maxOutput voltage: 12-24VDimming Control: 0-10VOperating Ambient Temperature: -40?~140?Dimensions: Wiring Diagram: